12-channel cascade controller AS-225D
12-channel cascade controller AS-225D
AS-225D, 5902431673981
Product description
Cascade controller. With the sequential function of the KASKADA.Power supply 9÷30V DC.
Purpose
The AS-225D controller is designed for cascade control of 12÷24 V staircase lighting, which allows to achieve the effect of light following a person walking up or down the stairs.
Functions
- Control of cascading multi-point lighting system;
- The ability to set the number of controlled light points (from 3 to 12);
- The ability to connect controllers in series to increase the number of controlled circuits;
- Additional control inputs:
- permanent light switching (for example during houseworks);
- light switching lock (for example brightness sensor signal);
- Control of light using a variety of setters including bell buttons, motion sensors, optical barriers, pressure sensors, etc.
- Adjustable "soft start" feature – soft brightening and dimming of lighting;
- "Night light" feature – the ability to set the brightness level when off, so that the stairs are never completely dark;
- Installation of the controller on a DIN rail;
- Built-in thermal protection.
Warning!
The "soft start" feature requires dimmable light sources.
| Power supply voltage | 9÷30 V DC |
| Number of channels | 12 |
| Maximum AC-1 load current | 4 A |(1 kanał) |
| Maximum total load (12 channels) | 24 A |
| Maximum voltage | 30 V DC |
| Switch-on duration (1 channel) | 3÷30 s |
| Delay in switching on the next channel | 0÷switch-on duration |
| The executive element | transistor |
| Output voltage | 9÷30 V DC |
| Cooperation with illuminated buttons | NO |
| Terminal | pluggable terminal blocks 2,5 mm² |
| Tightening torque | 0,4 Nm |
| Power consumption waking / working | 1 W / 4 W |
| Working temperature | -15 ÷ 50°C |
| Dimensions | 4 moduły (52,5 mm) |
| Assembly | on rail 35 mm |
| Ingress Protection Marking | IP20 |
AS ASO declaration CE 2023 (179.33k)
AS-225D manual (725.92k)
Related products:
Pulse power supply ZI 10-12P
ZI-10-12P
To under plaster box. Output voltage 12 V. Power 10 W.The ZI-10-12P power supply is designed for supplying low-voltage LED lamps.
Pulse power supply ZI 20-12P
ZI-20-12P
To under plaster box. Output voltage 12 V. Power 20 W.The ZI-20-12P power supply is designed for supplying low-voltage LED lamps.
Stair light LED LINA LS-LSC
LS-LSC
Dimmer decorative LED staircase. Cover color: satin, light color: cold, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
Stair light LED MAYA LS-MWC
LS-MWC
Dimmer decorative LED staircase. Cover color: white, light color: cold, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
Stair light LED MAYA LS-MSC
LS-MSC
Dimmer decorative LED staircase. Cover color: satin, light color: cold, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
Stair light LED MAYA LS-MAW
LS-MAW
Dimmer decorative LED staircase. Cover color: anthracite, light color: warm, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
Stair light LED INGA LS-IWC
LS-IWC
Dimmer decorative LED staircase. Cover color: white, light color: cold, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
Stair light LED INGA LS-ISW
LS-ISW
Dimmer decorative LED staircase. Cover color: satin, light color: warm, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
Stair light LED VIKA LS-VSC
LS-VSC
Dimmer decorative LED staircase. Cover color: satin, light color: cold, supply voltage: 12 V, power consumption: 1.2 W, brightness: 100 LM.
Laser distance sensor DRL-12 aluminum
DRL-12
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases.Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.Color: aluminum
