List of products by brand Automatyka F&F

There are 1041 products.

Showing 553-564 of 1041 item(s)

Active filters

Pulse meter CLI-01 Pulse meter CLI-01
Compare
Quickview

Pulse meter CLI-01

Programmable.
Pulse meters are intended for counting AC/DC voltage signals, generated by additional peripheral devices in order to determine the number of carried out working cycles in automatics systems, e.g. in order to control the number of press strokes, the number of revolutions of a rotating device, the number of components leaving the production line, etc.
Pulse meter CLI-02 Pulse meter CLI-02
Compare
Quickview

Pulse meter CLI-02

Programmable, multifunction electronic meter.
CLI-02 is a programmable, multifunction electronic meter enabling the counting of external pulses in 0 to 99 999 999 range (or using an internal divider up to 99 999 999 999). Pulses are counted according to an individual program, set by the user. After reaching the limiting value, the meter will configure itself according to individual user\'s needs.
Working time meter CLG-13T Working time meter CLG-13T
Compare
Quickview

Working time meter CLG-13T

Electronic one-way meter.
Working time meters are intended for counting the number of working hours in automatic production processes or the number of device working hours, which, due to safety requirements and operation efficiency have limited overhaul life, i.e operational capacity that may not be exceeded (e.g. advanced power units, special radioactive lamps, etc.).
Working time meter CLG-03 Working time meter CLG-03
Compare
Quickview

Working time meter CLG-03

Programmable, multifunction electronic meter.
CLG-03 is a programmable, multi-function electronic meter, enabling the counting of working hours of the connected devices or systems in 1 to 999 999 range, corresponding to 114 years of operation. Working time is counted according to an individual program, set by the user. After reaching the limiting value, the meter will configure itself according to individual user\'s needs.
Roller blind controller STR-1 Roller blind controller STR-1
Compare
Quickview

Roller blind controller STR-1

The roller blind controller STR-1 is designed for controlling roller blinds (up and down movement) or other devices (for example, gates) that are driven by a single-phase AC electric motor and operated by means of momentary switches (for example, bell-pushes).
Blind controller. To under plaster box Ø60.

Roller blind controller STR-2 Roller blind controller STR-2
Compare
Quickview

Roller blind controller STR-2

The roller blind controller STR-2 is designed for controlling roller blinds (up and down movement) or other devices (for example, gates) that are driven by a single-phase AC electric motor and operated by means of momentary switches (for example, bell-pushes).
One button type. To under plaster box Ø60.

Electricity consumption indicator LE-04d Electricity consumption indicator LE-04d
Compare
Quickview

Electricity consumption indicator LE-04d

Electric energy meter. Two tariffs. Current 100A.
LE-04d is a static (electronic), calibrated indicator of electric power of three-phase alternating current in direct system. The indicator is suitable for use with an external control timer and is designed for measuring and billing in two-tariff system.
Current relay EPP-619 Current relay EPP-619
Compare
Quickview

Current relay EPP-619

One function.
Current relay is used to control the value of the current in the circuit measured with switch contacts function in the case of the value of current above the set threshold values.
Current relay EPP-620 Current relay EPP-620
Compare
Quickview

Current relay EPP-620

4-functions.
Current relay is used to control the value of the current in the circuit measured with switch contacts function in the case of the value of current  above  the set threshold values.

Energy meter LE-01M Energy meter LE-01M
Compare
Quickview

Energy meter LE-01M

Remote reading. Single-phase. RS-485 port + Modbus RTU.
LE-01M is a static (electronic) indicator calibrated electricity single-phase alternating current in the system directly. It is used for readings and recordings taken of electrical energy for remote reading through a wired RS-485.

Energy meter LE-03M Energy meter LE-03M
Compare
Quickview

Energy meter LE-03M

Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03M is a static (electronic) rated energy, which is to serve as an auxiliary meters to measure energy consumption in a three phase direct system. It is used for readings and recordings taken power with remote readout via a RS-485 protocol.

Backup power controller SZR-281
Compare
Quickview

SZR-281

3 controlled lines.
Automatic transfer switching equipment is used to control the work performance and accuracy of power lines and automatic switching power supply facility sources in the event of power line parameters decrease or total loss of voltage on the line.
Pulse meter CLI-01 Pulse meter CLI-01

Pulse meter CLI-01

CLI-01, 5908312591764
Programmable.
Pulse meters are intended for counting AC/DC voltage signals, generated by additional peripheral devices in order to determine the number of carried out working cycles in automatics systems, e.g. in order to control the number of press strokes, the number of revolutions of a rotating device, the number of components leaving the production line, etc.
More
Compare
Quickview
Pulse meter CLI-02 Pulse meter CLI-02

Pulse meter CLI-02

CLI-02, 5908312592242
Programmable, multifunction electronic meter.
CLI-02 is a programmable, multifunction electronic meter enabling the counting of external pulses in 0 to 99 999 999 range (or using an internal divider up to 99 999 999 999). Pulses are counted according to an individual program, set by the user. After reaching the limiting value, the meter will configure itself according to individual user\'s needs.
More
Compare
Quickview
Working time meter CLG-13T Working time meter CLG-13T

Working time meter CLG-13T

CLG-13T, 5908312591863
Electronic one-way meter.
Working time meters are intended for counting the number of working hours in automatic production processes or the number of device working hours, which, due to safety requirements and operation efficiency have limited overhaul life, i.e operational capacity that may not be exceeded (e.g. advanced power units, special radioactive lamps, etc.).
More
Compare
Quickview
Working time meter CLG-03 Working time meter CLG-03

Working time meter CLG-03

CLG-03, 5908312591832
Programmable, multifunction electronic meter.
CLG-03 is a programmable, multi-function electronic meter, enabling the counting of working hours of the connected devices or systems in 1 to 999 999 range, corresponding to 114 years of operation. Working time is counted according to an individual program, set by the user. After reaching the limiting value, the meter will configure itself according to individual user\'s needs.
More
Compare
Quickview
Roller blind controller STR-1 Roller blind controller STR-1

Roller blind controller STR-1

STR-1, 5908312593300

The roller blind controller STR-1 is designed for controlling roller blinds (up and down movement) or other devices (for example, gates) that are driven by a single-phase AC electric motor and operated by means of momentary switches (for example, bell-pushes).
Blind controller. To under plaster box Ø60.

More
Compare
Quickview
Electricity consumption indicator LE-04d Electricity consumption indicator LE-04d

Electricity consumption indicator LE-04d

LE-04D, 5908312593379
Electric energy meter. Two tariffs. Current 100A.
LE-04d is a static (electronic), calibrated indicator of electric power of three-phase alternating current in direct system. The indicator is suitable for use with an external control timer and is designed for measuring and billing in two-tariff system.
More
Compare
Quickview
Energy meter LE-01M Energy meter LE-01M

Energy meter LE-01M

LE-01M, 5908312594390

Remote reading. Single-phase. RS-485 port + Modbus RTU.
LE-01M is a static (electronic) indicator calibrated electricity single-phase alternating current in the system directly. It is used for readings and recordings taken of electrical energy for remote reading through a wired RS-485.

More
Compare
Quickview
Energy meter LE-03M Energy meter LE-03M

Energy meter LE-03M

LE-03M, 5908312594406

Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03M is a static (electronic) rated energy, which is to serve as an auxiliary meters to measure energy consumption in a three phase direct system. It is used for readings and recordings taken power with remote readout via a RS-485 protocol.

More
Compare
Quickview
Back to top