Temperature regulator RT-824

Reference: RT-824, EAN13: 5908312592631

Product description

Temperature range: 5÷35ºC.
RT-824 temperature regulator is designed for direct control of heating devices fed by a voltage of 230V, maximum current of less than 16A.

Functions
* possibility of programming 1 required temperature
* the knob located on the front panel enables setting a required temperature
* the breaker switch located on the front panel enables switching off the power supply of the whole heating system
* the input for connecting a control clock
* signalling of the heating system activation
* 2 temperature sensors: an internal one and an external one
* 3 operation modes of the regulator: operation with the internal temperature sensor; operation with the external temperature sensor; operation with two temperature sensors
* in the mode of operation with the internal temperature sensor: in case of the failure of the temperature sensor the regulator will shift to the so-called safe automatic model and will try to maintain the temperature set
* automatic switching over to the mode of operation with the internal temperature sensor in case of a failure of the external sensor
* in the mode of operation with two temperature sensors, the external sensor is the limiting one and it does not permit the temperature of 27°C to be exceeded regardless of the temperature set by means of the temperature adjusting knob
* in the mode of operation with two temperature sensors: if both temperature sensors fail, the regulator will shift to the so-called safe automatic model. Working with interruptions, the regulator will try to maintain the temperature at the level of 80% of the set temperature.

Attention!
The probe is in set with temperature regulator.

Power supply voltage	230 V AC
The executive element	relay
Maximum load current	16 A
Contact configuration	1 × NO
Separation of the contact	NO
Temperature regulation range	5÷35°C
Hysteresis	3°C
Accuracy of setting	1°C
Accuracy of measurement	±1°C
Temperature probe	RT45
Internal temperature sensor	NTC
Terminal	pluggable terminal blocks 1,5 mm²
Tightening torque	0,4 Nm
Power consumption	0,8 W
Working temperature	-5÷50°C
Dimensions	front: 83,5×83,5 mm; gł.22 mm , tył Ø50; gł.27,5 mm
Assembly	in a flush-mounted box Ø60
Ingress Protection Marking	IP20