Lighting dimmer SCO-816A 230 V

Lighting dimmer SCO-816A 230 V

SCO-816A, 5902431671994

Product description

With 1 to 10 V analog input.
The universal lighting dimmer allows you to adjust the brightness of the lighting.

The SCO-816A universal dimmer is designed to regulate the brightness of dimmable high power sources, such as: incandescent and halogen lamps, toroidal transformers and regulated electronic transformers, dimmable LED bulbs and dimmable energy-saving LED lamps.

The lighting is switched on and off after a short press of the button connected to the ON / OFF control input. The brightness level will depend on the voltage value
control given on the analog input AIN. The relationship between the value of the control voltage and the output voltage on lighting circuits is shown in the following characteristics:

The SCO-816A dimmer is additionally equipped with:
- soft light switching on and off;
- Thermal protection;
- current overload control;
- built-in 20 A slow blow fuse;
- possibility of connecting the ON / OFF button controlled by 230 V AC mains voltage or low DC voltage.

The actual load limit will depend on the ambient temperature.
If the operating temperature exceeds the limit value then the permissible value the load is reduced.

3500W - resistance load: incandescent and halogen lamps.
2300W - inductive and capacitive load: toroidal transformers, adjustable electronic transformers, dimmable LED and ESL lamps.

Power supply voltage230 V AC
ControllingON/OFF 230 V AC or 9÷12 V DC
The executive elementtransistor
Current limit16 A
State memoryYES
Status memory after power failureNO
Maximum power of connected bulbs3600 W (R), 2500 W (L lub C), 1500 W (LED)
Coolingbuilt-in fan
Fan start temperature45°C
The maximum temperature inside the housing65°C
Applicationincandescent lighting, halogen lighting, LED (dimmable), toroidal transformers, electronic transformers (adjustable), fluorescent lamps (dimmable)
Control the loadswitching on or off at 0 (universal loads)
Controlling the brightness levelvoltage 1÷10 V DC
Brightening / dimming time1 s
Internal overcurrent protectionslow-blow fuse 20 A (6,3 × 32 mm)
Power connectionterminals 4 mm², torque 0.5 Nm
Connection - low voltage circuitsterminals 2.5mm², torque 0.4Nm
Tightening torque0,5 Nm
Power consumptionbelow 5 W
Working temperature0 ÷ 40 °C
Dimensions1888 S x 90 W x 93 G (mm)
Assemblymounting plate
Ingress Protection MarkingIP20