Panel signal transducer PA-02-MBT

Reference: MAX-PA-02-MBT, EAN13: 5902431672557

Product description

The PA-02-MBT is a 0÷20 mA/ 0÷10 V panel signal transducer with the possibility of setting two independent alarms that control two relays.

The result is scaled according to the linear characteristic set by the user.
The device is equipped with Modbus RTU bus that allows to remotely configure and read the measured parameters. The module is enclosed in a 36×72 mm panel casing with a 14 mm
display in the front part. Additionally, on the front panel there are LEDs indicating the current status of alarm outputs and one LED that indicates Modbus communication. The buttons are used for local configuration of the device parameters.

Type	przetwornik sygnałów
Power supply voltage	9÷30 V AC/DC
Contact configuration	2 × NO/NC
Separation of the contact	YES
Wejście pomiarowe	separowane 0÷20 mA/0÷10 V
Histereza alarmów	1÷9999
Dolny próg alarmów	-999÷9998
Górny próg alarmów	-998÷9999
Opóźnienie alarmów	0 s÷180 s
Display	4-digit LED (height figures 14 mm)
Accuracy of measurement	1%
Communication protocol	MODBUS RTU
Baudrate	1200÷115200 bit/s
Data bits	8
Stop bits	1 lub 2
Bits of parity	EVEN / ODD / NONE
Address	1÷247
Load current of the relay	6 A
Power consumption (max)	100 mA
Terminal	pluggable terminal blocks 1,5 mm²
Tightening torque	0,4 Nm
Working temperature	-10÷40°C
Dimensions	72 mm x 72 mm x 92 mm
Mounting hole	66 mm × 66 mm
Assembly	Front of control cabinet
Ingress Protection Marking	IP20