The roller blind controller STR-2 is designed for controlling roller blinds (up and down movement) or other devices (for example, gates) that are driven by a single-phase AC electric motor and operated by means of momentary switches (for example, bell-pushes).
One button type. To under plaster box Ø60.
Remote reading. Single-phase. RS-485 port + Modbus RTU.
LE-01M is a static (electronic) indicator calibrated electricity single-phase alternating current in the system directly. It is used for readings and recordings taken of electrical energy for remote reading through a wired RS-485.
An analogue temperature transducer with a 4–20 mA current output.
Measuring range: −50 to 100°C.
Measurement via internal or external KTY81-210 sensor.
Surface-mounted or installed in a Ø60 mm junction box.
Compatible with RT and RT2 probes.
External probes available separately.
An analogue temperature transducer with a 0–10 V voltage output.
Sensor: KTY81-210.
Measurement range: −50–100°C.
Compatible with RT and RT2 probes.
Mounting on a 35 mm rail.
The temperature sensor must be purchased separately.
An analogue temperature transducer with a 0–10 V voltage output.
Measurement using the internal KTY81-210 sensor or an external RT/RT2 probe.
Measuring range: −50 to 100°C.
Installation on a flat surface or in a Ø60 mm flush-mounted box.
RT and RT2 probes available separately.
Module with 4 analogue inputs and Modbus RTU communication.
Each channel: 0–10 V voltage input or 4–20 mA current input.
Measurement range of the current channel: 0–20 mA.
Communication interface: RS-485.
Mounting on a 35 mm rail.
The roller blind controller STR-2 is designed for controlling roller blinds (up and down movement) or other devices (for example, gates) that are driven by a single-phase AC electric motor and operated by means of momentary switches (for example, bell-pushes).
One button type. To under plaster box Ø60.
Remote reading. Single-phase. RS-485 port + Modbus RTU.
LE-01M is a static (electronic) indicator calibrated electricity single-phase alternating current in the system directly. It is used for readings and recordings taken of electrical energy for remote reading through a wired RS-485.
An analogue temperature transducer with a 4–20 mA current output.
Measuring range: −50 to 100°C.
Measurement via internal or external KTY81-210 sensor.
Surface-mounted or installed in a Ø60 mm junction box.
Compatible with RT and RT2 probes.
External probes available separately.
An analogue temperature transducer with a 0–10 V voltage output.
Sensor: KTY81-210.
Measurement range: −50–100°C.
Compatible with RT and RT2 probes.
Mounting on a 35 mm rail.
The temperature sensor must be purchased separately.
An analogue temperature transducer with a 0–10 V voltage output.
Measurement using the internal KTY81-210 sensor or an external RT/RT2 probe.
Measuring range: −50 to 100°C.
Installation on a flat surface or in a Ø60 mm flush-mounted box.
RT and RT2 probes available separately.
Module with 4 analogue inputs and Modbus RTU communication.
Each channel: 0–10 V voltage input or 4–20 mA current input.
Measurement range of the current channel: 0–20 mA.
Communication interface: RS-485.
Mounting on a 35 mm rail.
Polski
English