LED controller FW-LED2P

LED controller FW-LED2P

FW-LED2P

Two-channel LED controller 12 V DC.

F&Wave is a family of wireless devices controlled by radio with a range of up to 100 meters*. The receivers are available in either a DIN-rail mounting version (housing 1S) or a ├ś60 flush-mounted version. The transmitters are available as handheld remote controllers or as a flush-mounted version. The receivers relay control signals. The device that receives a control signal from the transmitter will automatically send it forward, which allows to increase the range of the remote control.


Features of the module
* Two-channel LED controller 12 V DC;
* Cooperation with remote control transmitters of the F&Wave system;
* The ability to control from up to 8 transmitters;
* Two local control inputs - the ability to directly control the lighting using any
   monostable buttons (for example: bell buttons);
* Ability to control 12 V LED strips, 12 V dimmable LED bulbs;
* Soft start - smooth lighting switching (on/off);
* Small enclosure size;
* Screw terminals for easy installation in a ├ś60 flush-mounted box;
* Retransmission of commands from the transmitter - the ability to increase the range of
   the remote control;
* Low power consumption - low operating cost;
* Built-in electronic thermal protection to prevent damage in case of excessive load of the
   controller.

Operating range
In an open space without any interfering factors the range of the devices controlled by radio fluctuates within the limits of 100 m. The range can be improved by direct retransmission of modules located in mutual coverage area. 

Devices of the F&Wave system

TransmittersReceiversBox ├ś60
DIN rail
  flush-mountedSingle relay     FW-R1P     FW-R1D
     FW-RC5Double relay     FW-R2P     FW-R2D
 remote controlsUniversal dimmer     FW-D1P     FW-D1D
     FW-RC4Roller-blind controller     FW-STR1P     FW-STR1D
     FW-RC10Two-channel LED controller     FW-LED2P     FW-LED2D

Power supply voltage10├Ě16 V DC
Number of channels2
Functiondimmer 12 V
Control inputs2
Control signal-
Control input0,25 W / 0,4 W
The executive elementtransistor
Radio frequency868 MHz
Output overload4A / 12 V
terminalscrew terminals 2,5 mm┬▓
Tightening torque0,4 Nm
Working temperature-25 ├Ě 65┬░C
dimensions43 mm x 48 mm x 20 mm
Assemblyin a flush-mounted box ├ś60
Level of securityIP20