Polski
EnglishSix-channel transmitter rH-S6
Six-channel transmitter of the F&Home RADIO system.
List of products by brand Automatyka F&F
FA-3X220 inverter
vector inverter Input voltage 3 x 400 V
Output voltage 3 x 400 V
Maximum power22 kW
Inverters belong to the group of electronic frequency converters and are designed for the smooth regulation ofof three-phase induction motors.
Light dependent relay AZ-B 24 V
Power supply: 21÷27 V AC/DC
Maximum load: 16 A
Mounting: on 35 mm rail
WithØ10 mm external probe included.
Twilight automatic device is used to control light sources or other energy receivers depending on the intensity of lighting - it turns off at dawn and turns on at dusk.
Energy meter LE-03M
Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03M is a static (electronic) rated energy, which is to serve as an auxiliary meters to measure energy consumption in a three phase direct system. It is used for readings and recordings taken power with remote readout via a RS-485 protocol.
Staircase timer AS-222T 230 V
230 V power supply. Maximum load 10 A. For 35 mm mounting rail.
With a light-off indication function and an anti-lock function.
The staircase timer is used to keep the lighting in corridors, stairwells or other areas switched on for a specified period of time, after which the lighting will switch off automatically.
1-channel relay in hermetic housing Hermetic Box
Single relay communication via home Wi-Fi network in hermetic housing suitable for outdoor installation.
Network termination module LT-04
The LT module is used for termination, polarization and amplification of the signal line of the RS-485 network.
Laser distance sensor DRL-12-30 color merbau satin
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases.
Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
Sixteen-channel scene module
The mH-MS scene module is a dedicated component of the F&Home system to control scenes configured on the mH-TS12 or mH-TS15 touch panel using the normally open (bell) buttons.
Analog outputs module rH-AO3
Analog outputs module of the F&Home RADIO system.
Electronic bistable impulse relay BIS-410-LED
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60. Can be used with backlit buttons.
Light dependent relay AZ-B-PLUS 230 V
Power supply: 195÷253 V AC
Maximum load: 16 A
Mounting: on 35 mm rail
Withexternal probe PLUS included.
Twilight switch is used to control light sources or other energy consumers depending on the intensity of the lighting - it turns off at dawn and turns on at dusk.
Six-channel transmitter rH-S6
Six-channel transmitter of the F&Home RADIO system.
FA-3X220 inverter
vector inverter Input voltage 3 x 400 V
Output voltage 3 x 400 V
Maximum power22 kW
Inverters belong to the group of electronic frequency converters and are designed for the smooth regulation ofof three-phase induction motors.
Light dependent relay AZ-B 24 V
Power supply: 21÷27 V AC/DC
Maximum load: 16 A
Mounting: on 35 mm rail
WithØ10 mm external probe included.
Twilight automatic device is used to control light sources or other energy receivers depending on the intensity of lighting - it turns off at dawn and turns on at dusk.
Energy meter LE-03M
Remote reading. Three phase. RS-485 port + Modbus RTU.
LE-03M is a static (electronic) rated energy, which is to serve as an auxiliary meters to measure energy consumption in a three phase direct system. It is used for readings and recordings taken power with remote readout via a RS-485 protocol.
Staircase timer AS-222T 230 V
230 V power supply. Maximum load 10 A. For 35 mm mounting rail.
With a light-off indication function and an anti-lock function.
The staircase timer is used to keep the lighting in corridors, stairwells or other areas switched on for a specified period of time, after which the lighting will switch off automatically.
1-channel relay in hermetic housing Hermetic Box
Single relay communication via home Wi-Fi network in hermetic housing suitable for outdoor installation.
Network termination module LT-04
The LT module is used for termination, polarization and amplification of the signal line of the RS-485 network.
Laser distance sensor DRL-12-30 color merbau satin
The DRL-12 is a laser sensor designed to control lighting, especially in corridors and staircases.
Precise detection setting from 0.1 to 2 m, direct load up to 50 W / 12 V DC, cooperation with AS-225 controllers, built-in brightness sensor.
Sixteen-channel scene module
The mH-MS scene module is a dedicated component of the F&Home system to control scenes configured on the mH-TS12 or mH-TS15 touch panel using the normally open (bell) buttons.
Electronic bistable impulse relay BIS-410-LED
Electronic bistable impulse relay allows switching of lighting or other equipment from several different points of using the control buttons are connected in parallel.
Relay version "i" is to pin adapted to cooperate with the receivers with high starting current, such as LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc.
With switch off timer. Power supply 230 V AC. Maximum load 16 A (160 A/20 ms). To under plaster box Ø60. Can be used with backlit buttons.
Light dependent relay AZ-B-PLUS 230 V
Power supply: 195÷253 V AC
Maximum load: 16 A
Mounting: on 35 mm rail
Withexternal probe PLUS included.
Twilight switch is used to control light sources or other energy consumers depending on the intensity of the lighting - it turns off at dawn and turns on at dusk.